Roofing options
Flat Patio Roofing Options in Perth
The sheet on top decides how hot the patio gets, how loud it is in rain, how far it spans and what you look up at from the table.
- Experience18 years in Perth
- Engineer certifiedEvery span signed off
- InsuredHomes and business
- Warranty10-year workmanship
Four materials
Each one is right for a different patio
There is no best roof here, only the right roof for how you use the space. Read the trade-offs on each page before you decide.

Colorbond Flat Patios
Single-skin steel. The Perth default, every Colorbond colour.
5 pros, 5 things to weigh up
Read the Detail
Polycarbonate Flat Patios
Translucent sheeting. Daylight where a solid roof would darken.
6 pros, 5 things to weigh up
Read the Detail
SolarSpan Flat Patios
Insulated panel. Long clear spans, finished ceiling included.
6 pros, 5 things to weigh up
Read the Detail
Cooldek Flat Patios
Insulated panel, ribbed or corrugated, finished ceiling underneath.
5 pros, 5 things to weigh up
Read the DetailStill weighing up the sheet?
We will bring samples out, look at how the space faces and tell you which of the four actually suits it. No cost and no obligation.
Side by side
The five things people compare in a patio roof
Figures are indicative and confirmed by the engineer against your wind classification and dimensions.
| Material | Heat performance | Noise in rain | Natural light | Clear span | Ceiling finish |
|---|---|---|---|---|---|
| Colorbond Flat Patios | No insulation, radiates heat down through the afternoon | Loud, drums in a downpour | None, opaque sheet | Short, needs purlins every 1.2 to 2.4 m | Purlins visible unless you add a lining |
| Polycarbonate Flat Patios | Clear passes heat freely, tints cut it and dim the space | Loudest of the four | Around 10 to 90 per cent, set by the tint | Shortest, supports at 600 to 900 mm | Translucent sheet, supports visible through it |
| SolarSpan Flat Patios | Insulated core, roughly R1.4 at 50 mm to R2.8 at 100 mm | Noticeably quieter than single-skin steel | None, opaque panel | Around 3 to 6 m clear, no purlins | Finished flat or lightly grooved underside |
| Cooldek Flat Patios | Insulated core, roughly R1.4 at 50 mm to R2.8 at 100 mm | Noticeably quieter than single-skin steel | None, opaque panel | Around 3 to 6 m clear, no purlins | Finished smooth or lightly ribbed underside |
Next step
Not sure which roof your patio wants
Tell us which way the patio faces and how you plan to use it, and we will tell you plainly which of the four belongs on it.